Home » Blog » Tags: Power Morpher

Posts Tagged ‘Power Morpher’

Sunday, March 6th, 2011

Most people have already seen my Power Morphers and display case but here’s a new photo of the pride and joy of my collection on its new shelf.

I wanted to make the display case look a bit like it was floating underneath my Zeo Shelf. The coins are now all starlight studio metal coins apart from the Triceratops and Pterodactyl coins as they do not fit in the morpher. I’m hoping to complete the MMPR 2010 line to display on the top but I fear I have left it too late to buy some of the figures, especially the White Ranger.

Power Morpher Display Case Shelf

Wednesday, July 7th, 2010

I received my custom Morpher Display Case today from www.acrylicdisplaycases.co.uk.

I am very impressed with their service and quality as it only took 12 days for them to make and ship me this perfect display case. The base is felt lined top and bottom, the clear parts are made from perspex that protects from dust, smoke and UV light!

New Custom Display Case
New Custom Display Case

New Custom Display Case (front)
New Custom Display Case (front)

New Custom Display Case (top)
New Custom Display Case (top)

New Custom Display Case (side)
New Custom Display Case (side)

Monday, April 19th, 2010

I thought I would create a tutorial on this in case anyone else has a similar problem and is not aware of such an easy fix ๐Ÿ˜€

Please note: This is not a fix for a morpher with unwanted gaps between the plates when closed. King Ranger’s thread shows a very helpful fix for that problem.

This thread will deal with fixing a morpher where the X Lock is broken beyond repair and needs to be replaced.

A few years ago, I found a seller on ebay with a box of 10 MISB Power Morpher / Gunswords. I ended up buying 5 from him so I would have all 6 plus my original morpher from 1993. It was too good an offer to pass up, though it cost me over $400 in total.

Imagine my horror when I received the last one, only for the morpher to snap inside the first time I pushed the button! :(. I decided to use this one as the Pterodactyl Morpher in my display, as I figured this was the one I was least likely to play with lol (apologies to any pink ranger fans).

I could hardly blame the seller as he had found them sitting in a Japanese warehouse for 17 years. The 4 others I bought were as perfect as the day they were made and so I decided to chalk it up to bad luck. I thought about replacing it by buying another one but he had sold out by then.

I’ve been putting off fixing this for a while now, partly because I intended to customize them with accurate stickers eventually etc and also because I was petrified of damaging the morpher further by opening it up and tampering with the insides.

I’d seen many threads on here in my searches for a solution that made it sound like a pretty daunting task to even open up the back of a morpher, let alone fix the spring mechanism. But I have to say, once I’d found the parts I needed, I found it really easy to replace the parts and put it back together.

So here’s the problem:

The first time I pressed the button, the morpher made an awful snapping sound inside and will no longer open on its own accord. To open the morpher, I have to press the button and open the plates manually. There was also a small piece of plastic now rattling around inside the morpher. Thankfully the electronics and everything else was intact.

So I decided it was high time I tried to fix this and here’s how I did it:

How to fix a Power Morpher X Lock the easy way

First, remove the batteries. The are sitting on a spring which may cause them to fly out (taking other small parts with them) when you open the back of the morpher.

Locate the screws that will allow you to remove the back of the morpher. Bad news for those with BoJ Bucklers or Zyuranger reprolabels, you will have to remove or damage the stickers to get at these screws. There is a spring located near the button that often flies out when you open the back so be careful not to lose it. There is also a wire that connects the back piece to the rest of the morpher. Be careful not to pull on this wire or you may have some soldering to do.
The screws that allow you to open up the back of the morpher

Keep any small pieces in a container to avoid losing them while you work.
Keep small parts in a container while you work on the X Lock

Here, you can see the X Lock and the particular piece that has broken on mine. The lower part of the X shape has a piece that attaches to the other side of the spring. This piece has snapped off on mine and so the spring can no longer power the mechanism to open the plates.
My Pterodactyl Morpher is broken inside and will need a replacement part before I add the back stickers

However, it does not really matter which piece of your X Lock snaps off. If your X Lock is broken in any way, you can buy replacement metal parts on ebay from http://myworld.ebay.com/cowbenzer/.

First, remove the handle (this just slides out) and remove the small red piece of plastic next to the button side. Undo the silver screws to remove the old X Lock. It will then look like this.
Power Morpher minus X Lock

Here are my new Aluminum X Lock pieces with their plastic counterparts.
New metal X Lock pieces with their plastic counterparts. Metal X Lock replacements by cowbenzer on ebay.

Here you can clearly see the piece that broke off on mine.
My reason for replacing the X Lock. As you can see the small hook shaped part has snapped off the original plastic piece

At first I tried replacing both parts but it seems, while the bottom piece is identical to the plastic original, the top piece is not and my morpher kept getting stuck when opening. I could easily file off the button end of the top piece to make it identical though, it is very close.
I originally tried replacing both X Lock parts but the button didn't always trigger the mechanism every time.

In the end, I decided to just replace the piece that was broken and keep the other plastic piece. As you can see, the spring should fit over the two hooks on the X Lock pieces as shown.
In the end I opted for replacing only the broken part and the mechanism seemed to trigger properly. The morpher now works perfectly.

When fixing the silver screws back in, you may have to experiment with how tight you have them to achieve the desired smooth opening effect from the mechanism. Also, the original pieces seem to be covered in some sort of grease at the ends to allow the morpher to open smoothly. You may need to grease the area where the silver screws make contact with your new X Lock pieces to make the opening mechanism function smoothly.

I was very pleased with the results of this fix as my morpher now functions just as well as my others and I am now able to add the back stickers I have to complete my display. The new metal part is not likely to break like the original did. Cowbenzer did an excellent job of recreating these parts in metal (though the top piece needs a little filing on one end to make it match the plastic original) and they fix this problem perfectly. Also, my morpher does not have quite such a large gap between the plates when closed anymore but I think I’ll have to employ King Ranger’s method to eliminate the gaps entirely.

So there you have it, as easy as buying some new replacement parts and fitting them. ๐Ÿ˜€

On another note, I received my Starlight.Studio power coins today but there was a problem. Starlight.Studio have been awesome (as always) and are going to send me another set. I will take some photos when they arrive!

Sunday, April 11th, 2010

I finally finished my first customization project today! ๐Ÿ™‚

I hope to give as much detail as possible about how I acquired the necessary parts, stickers and morphers etc in case anyone wants to try this themselves.

Here’s my finished morpher customs:

Finished Morphers 1
Finished Morphers 2

Here’s how they looked before:

All 6 Power Morhpers Before

So I’ve had my 6 Power Morphers for a few years now. The one at the back is my original from back in the day. Its been well played with and the plates were particularly worn.

The other 5 I got from a seller on ebay who had a box full of MISB Power Morpher / Gun Swords he found in an old Japanese warehouse! I originally intended to buy one to replace my well worn original but when he said he had 6 left I had to buy 4 more. They cost me about $80 each plus shipping to the UK. It wasn’t cheap.

I was tempted to buy another so I had 6 brand new ones but the seller sold out before I had the chance. Then I figured that I could customize my original morpher gold to achieve the 6th gold morpher look.

Here’s some more pics of the finished customs:

Season 1 style finished morphers (Dragonzord Coin by Buzzs_room)
Season 1 style finished morphers (Dragonzord Coin by Buzzs_room)

Season 2 style finished morphers (Tigerzord Coin by PowerProps)
Season 2 style finished morphers (Tigerzord Coin by PowerProps)

Season 3 style finished morphers (coins by Argus)
Season 3 style finished morphers (coins by Argus)

Finished Morphers (back) (The Pterodactyl needs fixing inside so I have left off the back stickers for now)
Finished Morphers (back) (The Pterodactyl morpher needs fixing inside so I have left off the back stickers for now)

All my coins. Ninja Coins by Argus and dragon / tigerzord coins by Buzzs_Room. I also have 6 sets of the original 5 morpher coins
Here is all the coins I own. Ninja Coins are by Argus and dragon / tigerzord coins are by Buzzs_Room. I also have 6 sets of the original 5 morpher coins and Jess’s metal tigerzord coin. I have sets of starlight.studio‘s metal coins on their way too!

Finished Tigerzord / Dragonzord Morpher (Tigerzord Coin by PowerProps)
Finished Tigerzord / Dragonzord Morpher (Tigerzord Coin by PowerProps)

Finished Mastodon Morpher
Finished Mastodon Morpher

Finished Pterodactyl Morpher
Finished Pterodactyl Morpher

Finished Triceratops Morpher
Finished Triceratops Morpher

Finished Saber Tooth Tiger Morpher
Finished Saber Tooth Tiger Morpher

Finished Tyrannosaurus Morpher
Finished Tyrannosaurus Morpher

Comparison with an unfinished morpher. Reprolabel's stickers are much better quality than the originals. Bandai also did a pretty bad job of applying the stickers on some of my morphers
Comparison with an unfinished morpher. Reprolabel’s stickers are much better quality than the originals. Bandai also did a pretty bad job of applying the stickers on some of my morphers.

Ah the destruction! (The original stickers I have removed)
Arrghhh the destruction! It’s so scary removing the stickers from MISB Power Morphers!

Finished Gold Morpher with my old plates still intact
Finished Gold Morpher with my old plates still intact. The best thing about this project was that I did not have to damage my original childhood morpher at all.

My Pterodactyl Morpher is broken inside and will need a replacement part before I add the back stickers
My Pterodactyl Morpher is broken inside and will need a replacement part before I add the back stickers. I’ve already ordered the part I need.

Hope you like them.

Also, check out my tutorial on customizing morphers.

UPDATE: 11/04/10

Someone on RangerBoard.com just asked me how much this project has cost in total:

My original Power Morpher: $25ish (way back in 1993)
5 MISB Power Morphers: $80 each
Replacement gold morpher plates: $14
6 Sets of TV Show Style Stickers and 6 Sets of Zyuranger Style Stickers: $122
Metal Coins: $85
Replacement X Lock for Pterodactyl Morpher: $19.99

Total: (roughly) $665 ๐Ÿ™

Damn wish I hadn’t worked that out now lol. I had not really thought about how much it had cost so far. Damn you Bandai, why couldn’t you have just got the morpher right in the first place lol! Well worth it though. It has taken me a while to gather the necessary parts and stickers but they look beautiful on display. I’m very pleased with my first toy custom project :).

Sunday, April 11th, 2010

I’ve received a lot of questions asking how I achieved the show accurate look on my recent morpher customizations so I thought I would create a “how to” style thread as I took lots of pictures at various stages in the customization process.

I’m certainly no artist so I’ve always shied away from customizing any of my beloved collection but the various prop / sticker makers in our fandom have made customizing a Power Morpher a really easy job.

So for those who don’t know, here’s how I did it.

How to make a show accurate Gold Dragon Buckler style morpher.

My original childhood Morpher
Here is my original childhood morpher before customization. As I’ve had it so long and it has some serious sentimental value, I really did not want to have to paint this morpher in order to achieve the gold morpher look.

My new gold replacement morpher plates from Powerprops on ebay.
Thank goodness for prop makers! There’s no need to paint and possibly ruin my beloved childhood toy as you can buy replacement front plates (already painted gold) from PowerProps on Ebay.

The screws that with enable you to remove and clean the front plates
Locate the screws (pictured above) that will allow you to remove the original plates.

Unfinished Morpher with front plates removed
Carefully remove the original plates.

My New Gold Morpher with my old plates
Et voila! One Gold Morpher without damaging my original plates. (Avoid over tightening screws)

My New Gold Morpher ready to apply stickers from reprolabels.com
Next, purchase some replacement stickers from www.reprolabels.com. There is a choice of either TV Accurate Style, Movie Style, Zyuranger Style or Bandai Original Style front stickers. I have chosen to use the TV Accurate versions.

My New Gold Morpher with Dragonzord coin by Buzzs_room on rangerboard.com
Carefully apply the stickers (you can use tweezers to help apply them accurately) and we have a finished Gold Morpher!

You can view more pics of my customs here.

How to make a show accurate Regular Buckler style morpher.

Tyranno Morpher before adding / removing the stickers (front)
Here’s another of my morphers that I am going to customize into a show accurate silver version.

So scary removing the stickers from a MISB Power Morpher! Feels so destructive!
Carefully peel off the old stickers. I was lucky enough to get them off in one piece without much residue left behind. I then removed the plates (see instructions above) and washed them using soap and water to give the new stickers a clean surface to adhere to. However, you will need to clean any residue off to avoid bumps in your new stickers. Many users recommend products like “goo gone” and other solvents to remove stubborn residue but I was worried about the possibility of removing the original paint etc so I tried to remove the stickers as carefully as possible instead.

Tyranno Morpher with its new show accurate stickers (front)
After carefully applying the new TV accurate stickers from www.reprolabels.com my morpher is finished.

You can view more pics of my customs here.

Back Stickers

I have also opted to add the original Zyuranger back stickers to my morphers too. This meant buying two sets of stickers but it was worth it in my eyes.

Tyranno Morpher before adding / removing the stickers (back)
Before (Be sure to clean the back with a damp cloth to give the new stickers a clean surface to adhere to)

Tyranno Morpher with its new show accurate stickers (back)
After

Gaps in your morpher when closed?

Gaps in closed morpher.
Finally, do you have gaps like this in your morpher when its in closed mode?

Then please check out King Ranger’s very helpful tutorial on fixing this problem.

Hope this tutorial helps some folks to customize their morphers ๐Ÿ™‚

You can view more pics of my morpher customs here.

Tuesday, December 8th, 2009

I finished another morpher custom today. Thats two down and four to go lol!

This has worked out to be a pretty expensive project. Thanks to BoA’s notorious flipping of the morpher, inaccurate stickers and lack of Dragon Buckler release, my morpher display has cost a lot of money to make it show accurate. ๐Ÿ™

I’ve had to take my time on this project as even the stickers have cost me $22 a pop. That might not sound like much but when I worked out that it would cost $132 to customise all my morphers :o, I decided to do them one at a time.

I probably won’t post anymore pics after this until I’ve done the other 4 as once you’ve seen a gold one and a silver one, I’m sure you pretty much get the idea. Unless anyone would like me to post pics of the other customs when I get round to them?

Tyranno Morpher before adding / removing the stickers (front)
Tyranno Morpher before adding / removing the stickers (front)

Tyranno Morpher before adding / removing the stickers (back)
Tyranno Morpher before adding / removing the stickers (back)

So scary removing the stickers from a MISB Power Morpher! Feels so destructive!
So scary removing the stickers from a MISB Power Morpher! Feels so destructive! I feel like that kid in Toy Story with the messed up toys lol.

I was trying to think of a less destructive way of changing the stickers. I toyed with the idea of asking Jess if she could do me some more plates but in the standard silver color but I decided removing the old stickers was the only way. Besides, reprolabels are much better quality and they also sell replacements of the original stickers in case I ever want to undo my custom work (which is highly unlikely).

New stickers I received from reprolabels.com
New stickers I received from reprolabels.com

Reprolabels.com sent me two versions of the TV front stickers. The regular one is on the right and their new metallic finish version is on the left
They also sent me two versions of the TV front stickers. The regular one is on the right and their new metallic finish version is on the left. I think the metallic finish looks great (the camera does not do it justice) but I’m obviously going for the show accurate look so I haven’t used them.

Tyranno Morpher with its new show accurate stickers (front)
Finished Tyranno Morpher with its new show accurate stickers (front)

Tyranno Morpher with its new show accurate stickers (back)
Finished Tyranno Morpher with its new show accurate stickers (back)

Finished Tyranno Morpher next to one of my other morphers that has yet to receive its new stickers. Notice that Bandai put the original stickers on upside down and that they are a different design to the ones on the show.
Finished Tyranno Morpher next to one of my other morphers that has yet to receive its new stickers. For the uninitiated: Notice that Bandai put the original stickers on upside down and that they are a different design to the ones on the show. ๐Ÿ˜ก

Finished Tyranno Morpher with my other recent custom - show accurate Green / White Ranger Morpher
Finished Tyranno Morpher with my other recent custom – show accurate Green / White Ranger Morpher

Finished Tyranno Morpher in my new Dyno Buckler Holster (front)
Finished Tyranno Morpher in my new Dino Buckler Holster (front)

Dyno Buckler Holster with my newly customised american Power Morpher (front)
Dragonzord Morpher in Dino Buckler Holster

Finished Tyranno Morpher in my new Dyno Buckler Holster (back)
Finished Tyranno Morpher in my new Dyno Buckler Holster (back)

I’ve decided to add the holsters to the display. I’m going to use my real one for the dragonzord morpher and get some prop replica versions from Outatime on RangerBoard.com for the rest of them (one of which I’ve ordered already).

Hopefully, my next update on this project won’t take too long. Stay tuned for pics of my 6 new morpher customs with holsters!

Tuesday, December 1st, 2009

Received my Dyno Buckler Holster this morning. I’ve been after one of these loose for a while now.

Front
Dyno Buckler Holster (front)

Back
Dyno Buckler Holster (back)

For those who haven’t already seen this post, I’m slowly working through customizing my 6 Power Morphers into show accurate versions. Here’s my newly customized American morpher in my new holster.
Dyno Buckler Holster with my newly customized American Power Morpher (front)

Here’s the back (with stickers from reprolabels)
Dyno Buckler Holster with my newly customised american Power Morpher (back)

Haven’t yet customised this morpher (reprolabels on the way) but it is good for illustrating BoA’s infamous stupidity in the flipping of the morpher.
Have yet to customise this morpher, as you can see Bandai America made them the wrong way round!

One last drool pic. I’m so pleased with how my morpher turned out (In case you hadn’t noticed lol).
My newly customised american morpher with japanese holster. Tigerzord coin by Buzzs_Room, gold recasts of morpher front plates by powerprops and white communicator by starlight studio

Saturday, November 21st, 2009

Got my new gold morpher plates from Jess (PowerProps on Ebay). They are replacement recasts painted gold for those of us who are not skilled enough to attempt to repaint them ourselves. Jess’s paint job is way better than I could ever hope to achieve. Bless her, she also sent me a free falconzord coin!

My new gold replacement morpher plates from Powerprops on ebay. They sent me a free Falconzord coin!

Here’s Jess’s coin next to the one I recently recieved from Argus. Jess’s coin is on the left and Argus’s on the right. Keep in mind that Jess’s coin is an original sculpt. I think they are both awesome! Hail to the prop makers!
Falconzord coin on left made by Powerprops (original sculpt) Falconzord coin on the right made by Argus (from Mcdonalds coins)

Here’s my old original morpher (before). It has new bolts and zyu back stickers but I was waiting for the gold plates before I added the show accurate stickers.
Ready to swap the plates over to gold recasts made by Powerprops on ebay

The new plates simply screw on just like the old ones. Man, the morpher looks wierd without the plates!
Swapping the plates over to gold recasts made by Powerprops on ebay

One complete gold morpher!
My New Gold Morpher with my old plates

Ready to apply the rest of the reprolabels I bought.
My New Gold Morpher ready to apply stickers from reprolabels.com

Morpher complete! The best part is that I have not damaged my original childhood morpher to make this and I can return it to its old look whenever I want by swapping the plates back. It feels damn wierd morphing the other way round though lol!
My New Gold Morpher with my old plates and new reprolabels

Closed
My New Gold Morpher (Closed) with Tigerzord coin by Buzzs_room on rangerboard

Open (Tigerzord coin by Buzzs_room)
My New Gold Morpher (Open) with Tigerzord coin by Buzzs_room on rangerboard

Dragon coin by Buzzs_room
My New Gold Morpher with Dragonzord coin by Buzzs_room on rangerboard

Falconzord coin by Argus
My New Gold Morpher with Falconzord coin by Argus on rangerboard

Falconzord coin by Jess (PowerProps on Ebay)
My New Gold Morpher with Falconzord coin by Powerprops on ebay

And finally with my new white communicator ๐Ÿ™‚
My New Gold Morpher with my White Ranger Communicator

Sadly I’m re decorating my room this weekend so I can’t take another group shot with the gold morpher as the others are packed away :(. I’ll post one next week.

Now to get me some more reproplabels and finish the rest! Its gonna cost $120 to get the remaining stickers I need. $120 on stickers :o. Gonna get them a few at a time. Stay tuned!

Friday, November 6th, 2009

So first, the Tyrannosaurus morpher in my pictures has some pretty large gaps in the plates when in closed mode. (The others have gaps too but this one is the worst affected). I’ve seen someone mention on here before about tightening / replacing the springs inside the morpher to prevent it from gaping open when closed. I want to try and fix them before I apply the back stickers (which will cover the screws needed to get inside the morpher).

How should I go about fixing / replacing the springs? Does anyone have any experience in this? Any particular type of springs used?

Heres a pic of the gaps:
Gaps in closed morpher. Spirings need fixing!

This next one is probably much harder to fix, the pink ranger morpher broke the first time I pushed the button when removing it from its mint sealed box :(. I thought about emailing the seller about replacing it at first but it was his last one. I could hardly blame the seller for it breaking anyways as it is a 17 year old toys thats been sitting in a box in a warehouse for years. Just bad luck I guess. So I decided to use the broken morpher as the Pterodactyl morpher as I figured this would be the one I was least likely to play with lol.

The first time I pressed the button, it did not sound good. Sounded like something had broken inside and was rattling around in there now. Then when I closed it and reopened, it would not open on its own anymore. I can still open it manually though. Inside the morpher, the piece that the spring hooks onto had snapped off. I’ll post pics of the insides later on so you can see what I’m talking about.

I have never removed the transparent red plastic piece before as it looks like it might be connected to the electronics. Would it be fixable or is it best to try replacing the part?

Finally, the electronics on some of them do not work straight away. I have to press the button a few times before the lights /sounds kick in and they seem to take a while to “warm up” as they work better each time I press it. The batteries are all brand new. Anyone else experienced this?

Update 18/12/09

Thanks to King Ranger on RangerBoard.com for his useful fix to this problem!

Click here to view King Ranger’s thread.